Epson Stylus Pro 10000 - Test; Test Menu Sequence

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 208
5.4.3 Test
This function purposes checking the circuit board. Test items are shown in the Table
5-9.
5.4.3.1 Test menu sequence
Test menu sequence is shown in the Figure 5-13.
Figure 5-13. Test menu sequence
Table 5-9.
Item Description
Version Program, Backup parameter, Dip SW, Board review
Panel key, LCD,LED
Sensor CR home, Cap home, Cover, Lever, etc.,
Encorder CR (carriage), PF (paper feed)
Fan
Paper suction fan, Mist suction fan, Cooling fan, Heat sink
fan
Record Maintenance, Fatal error
D/A correction Input correction data/Check the corrected voltage
Head signal form Check the head drive signal
CSIC Display the CSIC information.
Actuator Solenoid, Motor
TEST : Version
TEST : Panel
TEST : Sensor
TEST : Encorder
TEST : Fan
TEST : Elec.
TEST : D/A Revision
TEST : Head Signal
TEST : CSIC
TEST : Actuator
Item
Enter
Pause
Version display
Item
Item
Item
Item
Item
Item
Item
Item
Item
TEST : Actuator 2
Item
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com