Epson Stylus Pro 10000 - Bi-D Adjustment

To Next Page

To Previous Page

EPSON Stylus Pro 10000/10000CF/10600 Revision D

Stylus Pro 10600 Adjustment 360

8.3.1.2 Bi-D adjustment

Performs alignment of Bi-D printing positions by PG small.

Performs alignment of Bi-D printing positions for each color of heads 1~3.

Adjustment prints in Bi-D and from the results inputs errors for CW printing positions

and CCW printing positions. (Inputs separately for heads and colors.)

In addition, the types of waveforms to be adjusted differs according to the cartridges

installed in the printer, so the adjustment target is set to VSD1 (240cps) and VSD2

(300cps) when installed cartridges are dye (AY) or former-type pigment (HC2).

Adjustment target is set to VSD1 (240cps) and VSD2 (240cps) when installed

cartridges are HCD and PPI.

Table 8-51 showing adjustment item.

Figure 8-6 showing Bi-D adjustment menu sequence and Figure 8-7 showing Bi-D

adjustment print pattern.

Table 8-51. Adjustment item

Item Description

Bi-D 240, V1, K Bi-D adjustment 240CPS VSD1 K

Bi-D 240, V1, C Bi-D adjustment 240CPS VSD1 C

Bi-D 240, V1, M Bi-D adjustment 240CPS VSD1 M

Bi-D 240, V1, LC Bi-D adjustment 240CPS VSD1 LC

Bi-D 240, V1, LM Bi-D adjustment 240CPS VSD1 LM

Bi-D 240, V1, Y Bi-D adjustment 240CPS VSD1 Y

Bi-D V2, K Bi-D adjustment 240/300CPS VSD2 K

Bi-D V2, C Bi-D adjustment 240/300CPS VSD2 C

Bi-D V2, M Bi-D adjustment 240/300CPS VSD2 M

Bi-D V2, LC Bi-D adjustment 240/300CPS VSD2 LC

Bi-D V2, LM Bi-D adjustment 240/300CPS VSD2 LM

Bi-D V2, Y Bi-D adjustment 240/300CPS VSD2 Y

Item

SelecType

Enter

[Enter] Adjust Print

Printing Pattern

BiD 240, V1, K 0

BiD 240, V1, C 0

BiD 240, V1, M 0

BiD 240, V1, LC 0

BiD 240, V1, LM 0

BiD 240, V1, Y 0

Adjustable with "Paper Feed +/-"