Epson Stylus Pro 10000 - Page 368

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Adjustment 361
Figure 8-6. Bi-D adjustment menu sequence

When press the "Enter" button during the "BiD End" display, operation mode shift
to the "Adj: Head LR Adj.".
 Print all of the test pattern when "Enter" button is pressed during the "[Enter]
Adjust Print" display.
Print the related pattern when press the "Enter" button after the value change.
 Difference of maximum and minimum correction value are within 64/1440 inch
with six colors.
Print pattern
Figure 8-7. Bi-D adjustment print pattern
Item
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
BiD V2, K 0
BiD V2, C 0
BiD V2, M 0
BiD V2, LC 0
BiD V2, LM 0
BiD V2, Y 0
BiD End
1
2
3
4
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Item
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com