Epson Stylus Pro 10000 - Head LR (Head Gap) Adjustment

To Next Page

To Previous Page

EPSON Stylus Pro 10000/10000CF/10600 Revision D

Adjustment Self-Diagnostics 237

5.4.4.11 Head LR (Head gap) adjustment

Correct the head to head gap. Print the test pattern with Uni-D mode and make sure the

print quality by referencing the Figure 5-64 then input the correction value.

Table 5-12 showing adjustment menu. Figure 5-63 showing menu sequence and Figure

5-64 showing print pattern.

Table 5-12.

Item Description

Gap 240, V1, C Uni-D Adjustment 240 CPS VSD1 C

Gap 240, V1, M

Uni-D Adjustment 240 CPS VSD1 M

Gap 240, V1, LC Uni-D Adjustment 240 CPS VSD1 LC

Gap 240, V1, LM

Uni-D Adjustment 240 CPS VSD1 LM

Gap 240, V1, Y Uni-D Adjustment 240 CPS VSD1 Y

Gap 300, V1, C Uni-D Adjustment 300 CPS VSD2 C

Gap 300, V1, M Uni-D Adjustment 300 CPS VSD2 M

Gap 300, V1, LC Uni-D Adjustment 300 CPS VSD2 LC

Gap 300, V1, LM Uni-D Adjustment 300 CPS VSD2 LM

Gap 300, V1, Y Uni-D Adjustment 300 CPS VSD2 Y

Item

SelecType

Enter

[Enter] Adjust Print

Printing Pattern

Gap 240, V1, C 0

Gap 240, V1, M 0

Gap 240, V1, LC 0

Gap 240, V1, LM 0

Gap 240, V1, Y 0

Gap 300, V2, C 0