Epson Stylus Pro 10000 - Version Display

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 209
5.4.3.2 Version display
Display the firmware version. (I/F controller, Engine controller)
Ensure the ESC/P3 controller, Backup parameter and Dip SW (on:0,off:1).
Individually display the version on the panel.
Figure 5-14 showing version display sequence.
Figure 5-14. Version display sequence
※ Additional information for version display.
Display the version as follows;
ddym
NOTE: dd: Date
NOTE: y: Year
NOTE: m: Month
<Example display meaning >
" 0507" means: Year=2000/Month=7/Date=5
If the I/F or ESC/P3 is not installed, each version display becomes "N/A".
Ver : I/F
Ver : Engine
Ver : ESC/P3
Ver : Param 1
Ver : Param 2
Ver : Dip SW
Ver : Main Rev
Ver : Panel Rev
Item
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Item
Item
Item
Item
Item
Item
Item
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com