Epson Stylus Pro 10000 - A13 Slant Adjustment

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 232
5.4.4.7 A13 slant adjustment
Print the test pattern and make sure the print quality by referencing the Figure 5-56.
If the slant condition is presented, perform the mechanical adjustment.
This test using A1 and A3 nozzle.
Figure 5-55 showing menu sequence.
Figure 5-55.
<Print sample>
1. Check items: Black lines and Magenta lines are continue as same level by a
magnifying glass with scale.
2. Printing method.
 One pass with Uni-D at 360dpi resolution for CR and 45dpi for PF.
Figure 5-56.
Shift to "A13 Slant Check End"
menu by pressing "Pause" key.
SelecType
SelecType
Enter
Printing Pattern
Wait
Adjust the slant?
End with "Pause" key.
A13 Slant Check End
Wait
Output Pattern
Shift to "A123" or "A13" slant
check menu with following key
operation.
"Enter" key : A123 slant check.
"Pause" key : A13 slant check.
Shift to"A13" slant check menu with
"Pause" key.
Print out the pattern with "Enter"
key.
Print END
CR movement END
Pause
CR movement END
Item
K
M
When check the slant, regard the
joint department shown here.
K
M
K
M
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com