Epson Stylus Pro 10000 - Head LR (Head Gap) Adjustment

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Adjustment 362
8.3.1.3 Head LR (Head gap) adjustment
Performs correction of head gap.
Adjustment prints in Uni-D and from the results inputs a correction value.
In addition, the types of waveforms to be adjusted differs according to the cartridges
installed in the printer, so the adjustment target is set to VSD1 (240cps) and VSD2
(300cps) when installed cartridges are dye (AY) or former-type pigment (HC2).
Adjustment target is set to VSD1 (240cps) and VSD2 (240cps) when installed
cartridges are HCD and PPI.
Table 8-52 showing adjustment item.
Figure 8-8 showing Uni-D adjustment menu sequence and Figure 8-9 showing Uni-D
adjustment print pattern.
Table 8-52. Adjustment item
Item Description
Gap 240, V1, C Uni-D adjustment 240CPS VSD1 C
Gap 240, V1, M
Uni-D adjustment 240CPS VSD1 M
Gap 240, V1, LC Uni-D adjustment 240CPS VSD1 LC
Gap 240, V1, LM
Uni-D adjustment 240CPS VSD1 LM
Gap 240, V1, Y Uni-D adjustment 240CPS VSD1 Y
Gap V2, C Uni-D adjustment 240/300CPS VSD2 C
Gap V2, M Uni-D adjustment 240/300CPS VSD2 M
Gap V2, LC Uni-D adjustment 240/300CPS VSD2 LC
Gap V2, LM Uni-D adjustment 240/300CPS VSD2 LM
Gap V2, Y Uni-D adjustment 240/300CPS VSD2 Y
Item
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Enter
[Enter] Adjust Print
Printing Pattern
Gap 240, V1, C 0
Gap 240, V1, M 0
Gap 240, V1, LC 0
Gap 240, V1, LM 0
Gap 240, V1, Y 0
Gap 300, V2, C 0
1
34
2
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Pause
Print End
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com