Epson Stylus Pro 10000 - CR + PF Motor

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 258
5.4.8.3 CR + PF Motor
Perform the CR motor and the PF motor simultaneous reliability test.
The CR + PF motor is actuated designated number.
When the reliability number is [-1], reliability is repeated until key is input.
When the reliability number is [-1], the biggest count number is 99,999,999 times
(within 8 column), and the count become 0 in the case that this is exceeded.
Figure 5-95 showing the CR + PF motor reliability test menu sequence.
Figure 5-95.

As for the parameter of CW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
 As for the parameter of CCW, [240CPS], [300CPS], [400CPS], and [800CPS] are
possible select.
 The maximum value of the paper feed is [100.0mm].
 The maximum value of the reliability number designation is [99,999,999 times].
 Carriage migration MAX location is 738.06 mm from the starting point location.
 Carriage migration MIN location is 111.05 mm from the starting point location.
 When the [Pause] key is pushed during the reliability test, the test can be broken.
Enter
Enter
Enter
Enter
Speed CW : 240CPS
Speed CCW : 240CPS
Feed Amount : 0.1mm
Life Count : -1
Count :-10
End : 50
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key
at unit of 0.1mm.
Adjustable with "Paper Feed +/-" key.
Adjustable with "Paper Feed +/-" key.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com