Epson Stylus Pro 10000 - Printing Output at the Time of Maintenance

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Maintenance General Maintenance Issues 268
Figure 6-1.
6.1.3 Printing output at the time of maintenance
Printing of the nozzle checking pattern / status sheet
Do the panel switch operation shown below, after confirm that the LCD display of the
operation panel is displayed "READY".
Figure 6-2.
Wait until the power supply lamp turns off,then extract the AC power cable from the
plug socket.
Cleaning unit
Waste ink unit (pads)
Flushing box
Dot missing detector
LCD Display
Operation Panel Switch
Confirm whether abnormal sound etc
.
does not occur during the actuation.
*1
*2
READY
PRINTER SETTING MENU
TEST PRINT MENU
NOZZLE CHECK PATTERN=PRINT
Print the nozzle check pattern.
STATUS SHEET
Print the status sheet.
SelecType
SelecType
Item
Item
Item
Power
Enter
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com