Epson Stylus Pro 10000 - Page 276

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Maintenance General Maintenance Issues 269
Figure 6-3. Operation Panel
*1 : Confirm that there are dot missing at the time of the nozzle checking pattern
printing. In the case that the abnormality was admitted pushing the cleaning switch for
3 seconds, and the head cleaning (about 2 minutes : Until the printing passable lamp
changes to the inspection from the flickering) is run. The nozzle checking tries to be
run once again hereafter.
Figure 6-4.
*2 : Use the status sheet as for the confirmation of the part life (the exchange time) that
showed in the Table 6 -2, because the status sheet prints the information that showed in
the Table 6 -3.
Good example Bad example
Table 6-3. Status sheet
Item Panel display Setting value Contents
Version of the firmware VERSION TOxxxx. yyyy .zzzz
The firmware version of the
printer is displayed.
Before page ink used quantity INK xx.x g
The ink used quantity in the page
that printed in immediately before
is displayed.
Printing number of sheets (C).
PRINTABLE SHEET
xxxxxxx sheet
Whether is displayed additional
how many sheets of printing
possibility, on the basis of the ink
used quantity in the page that
printed it in immediately before
every the ink.
C : Cyan
M : Magenta
LC : Light cyan
LM : Light magenta
Y : Yellow
K: Black
Printing number of sheets (M) PRINTABLE SHEET
Printing number of sheets (LC) PRINTABLE SHEET
Printing number of sheets (LM) PRINTABLE SHEET
Printing number of sheets (Y) PRINTABLE SHEET
Printing number of sheets (K) PAGE COUNT
Accumulation ink consumption
volume
TOTAL INK xxxxxxx.x g
The used quantity of the ink is
displayed with "g" unit.
Accumulation paper
consumption volume
PAPER COUNT xxxxxxx cm
The length of the form that used it
is displayed with "cm" unit.
Ink counter clear
INK COUNTER
CLEAR
Run
The ink counter is initialized in 0.
The consumption volume of the
ink in an optional printed matter
can be instrumented with [Ink
counter] and [Ink counter clear].
Paper counter clear
PAPER
COUNTER
CLEAR
Run
The form counter is initialized in
0.
The used quantity of the form in
an optional printed matter can be
instrumented with the [form
counter] and [form counter clear].
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com