Epson Stylus Pro 10000 - R Side Cover Removal

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 123
4.3.1.4 R Side Cover Removal
1. Remove the Panel Unit and H Top Cover. (Refer to 4.3.1.1 "Panel Unit Removal".
and 4.3.1.3 "H Top Cover Removal".)
2. Remove rear side two white screws (CS: M4x8).
Figure 4-13.
3. Remove right side two white screws (CS: M4x8).
Figure 4-14.
4. Remove two screws (CPP: M4x12).
Figure 4-15.
5. Slide the R Side Cover to the right and remove it.
Screws (Rear)
Screws (Right)
Screws
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com