Epson Stylus Pro 10000 - Encoder

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 211

"INK NOT xxxxxx" : Display of "xxxxxx" means ink cartridge name with
symbolic code.
 "EdgeAD xxxyyy"/"FrontAD xxxyyy/"RearAD xxxyyy" :
: Display of "xxx" means difference from ON minus Off, "yyy" means ON level.
Following figure showing the relation of sensor display and sub tank ink amount.
Figure 5-17.

"F" will display when the overflow condition is presented.
 "Laser xxxx" :Display of "xxx" means AGC thresh hold value. If the value is less
than "2208" you need to replace the dot missing detector unit.
5.4.3.5 Encoder
Display the CR and PF encoder value.
Figure 5-18 showing the encoder test sequence.
Figure 5-18.
Display unit is the number of encoded pulse.
When display "L" When display "1" When display "2"
U side
sensor
L side
sensor
U side
sensor
L side
sensor
U side
sensor
L side
sensor
Encoder : CR xxxx
Encoder : PF xxxx
Item
Item
0000
FFFF
SelecType
SelecType
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com