Epson Stylus Pro 10000 - Head Nozzle Check

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 228

Cursor skip the space area.
 When the [Enter] key is pushed with [Head * -1]-[Head * -4], display moves to the
menu next to 1 hierarchy.
 When the [Enter] key is pushed with [Head * -5], rank of the head is settled.
 After the code of the Head 1 or the Head 2 is input, display moves to [Head 2 code
input] or [Head 3 code input] individually.
 After the ink fill, display moves to the top menu of the adjustment.
 When the [Pause] key is pushed, display moves to the menu next to 1 hierarchy. At
this time, pay attention the code that input is not settling, although it is effective
 The migration of the cursor is skipped in the display item of [ \ ].
5.4.4.4 Head nozzle check
Ensure the dot nozzle operation with test print sample.
If the nozzle injection is not perfect, perform the head cleaning several times.
Ink cartridge replacement message will appear when the ink cartridge is empty.
Print out sample is shown on the Figure 5-49, Figure 5-50 and Figure 5-51.
Figure 5-48 showing the nozzle check menu sequence.
Figure 5-47.
Printing Pattern
Authen. Head Rank?
Wait
Pause key Chk. End
Wait
Enter
Return to "Nozzle Check End"
with "Pause" key.
Print End
Print Movement
Pause
Print Movement End
1
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com