EasyManua.ls Logo

Epson Stylus Pro 10000 - Periodic Maintenance Items; Product Life Information

Epson Stylus Pro 10000
376 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON Stylus Pro 10000/10000CF/10600 Revision D
Maintenance General Maintenance Issues 267
6.1.1 Periodic Maintenance Items
The printer uses sensors and counters to determine when consumable items need to be
replaced. When a consumable part has reached its predetermined end-of-life according
to the corresponding counter, a message appears. See the table below for parts which
require periodic replacement.
6.1.2 Product Life Information
The information regarding the life of the main body / each system department / part in
this machine is shown in Table 6-2.
Table 6-1. Periodic Replacement Parts
Items LCD Message Description
Maintenance kit
Stylus Pro 10000/
10000CFC
“MAINTENANCE REQ. 0100”
or
“SERVICE REQ. 00000100
Time of display occurrence”
Solution
Replace the following parts with theparts
in the Maintenance Kit;
•Waste Ink Pads
Cap Pump Assembly
Enforcement necessary
adjustmen
Maintenance mode 2 of
Waste Ink Counter Clear
Cleaning Clear
Ink Tubes
CR Motor
“SERVICE REQ. 00000101”
Time of display occurrence
Solution
Exchange the CR motor, steel belt, ink
tube and Head FFC.
Enforcement necessaryadjustmen
CR motor initialization of maintenance
mode 2
C A U T I O N
When replacing the waste ink pads, replace the pads in the waste
ink tank and not the whole tank. Put the old pads in a plastic bag
and throw away the used ink pads according to the laws and rules
in your area.
Table 6-2. Product Life Information
Items Setting value Notes Error
Part life 20,000 pages / in 5 years With B0 form No
Print head 28 billion shot / in 5 years Each nozzle No
Maintenance kit
(Waste Ink Pads, Flushing
Box, Dot missing detector)
Waste Ink total of 10kg B0 printing about 7000 sheets Yes
CR Motor
Ink tube
4,800,000 passes
1 pass =1 round trip
*Ink tube life is monitored
based on this counter value.
Yes
PF Motor 21,000 meter
PF action distance as the
monitor
No
Cutter
About 2000 times (the film
system form in the case of
about 1000 times 1 sheet of
form cut to every 1 counting
1 sheet of form cut to every 1
counting
No
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com

Table of Contents

Other manuals for Epson Stylus Pro 10000

Related product manuals