EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description SelecType Settings 38
1.6.2 Test Print Menu
1.6.2.1 Nozzle check
Figure 1-8. Nozzle check pattern
Order of colors from left - black, cyan, magenta, yellow, light magenta, light cyan.
Each parameter indicates following;
<xxxx>: version of I/F controller (4 letters)
<yyyy>: version of engine controller (4 letters)
<zzzz>: version of ESC/P3 controller (4 letters)
*<zzzz> is blank when ESC/P3 controller is not connected.
<aaaaaaa>: total ink counter just before print the last nozzle check pattern
(7 figures)
<bbbbbbb>: total ink counter just before print the nozzle check pattern (7 figures)
<ccccccc>: value of <aaaaaaa>-<bbbbbbb> (7 figures)
<ddddd.d>: total paper counter just before print the last nozzle check pattern
(5.1 figures)
<eeeee.e>: total paper counter just before print the nozzle check pattern
(5.1 figures)
<fffff.f>: value of <ddddd.d>-<eeeee.e>(5.1 figures)
1.6.2.2 Status sheet
Figure 1-9. Status sheet
Print status sheet with following specification.
Paper Size: A4
Font :Built-in font
Table 1-31. Test Print Menu
Display Message Item Notes
NOZZLE CHECK PRINT
Check the printout, any missing lines mean the
nozzle(s) are clogged.
STATUS CHECK PRINT
Prints the current printer settings.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com
To Next Page
Loading...
