Epson Stylus Pro 10000 - Maintenance Mode 2

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Maintenance Mode 2 48
1.8 Maintenance Mode 2
 Startup
1. The maintenance mode 2 display is selected by switching power ON while
pressing the Paper source, Cut/Eject, and Paper Feed
↓ buttons.
 Operation
1. The Setup items select mode is selected by pressing the Item button once. The first
Setup item on the Setup menu is displayed. The display is in the ’[Item]=[current
setup value]*’ format. The ’*’ represents the current setup value.
2. The Setup items are displayed in the ’[Item]=[current setup value]*’ format in turn
each time the Item button is pressed.
3. With the Setup items displayed, the settable values are displayed in turn in the
’[Item]=[current setup value](*)’ format each time the setup value + button or
setup value - button is pressed. The ’*’ is only displayed when the displayed setup
value is the current value. The values are displayed in reverse order by pressing the
setup value - button. If the setup value + button or setup value - button is pressed
for more than the set period of time the setup values are displayed periodically in
forward or reverse order respectively.
4. When the Item button is pressed, the displayed setup value is entered and recorded
as the current setup value, and any associated operations are run. No operation
occurs if’*’ is already displayed.
5. When the Item button is pressed in the Setup item select mode, the system returns
to the maintenance mode 2.
 Termination
1. Switch power OFF > ON.
 Maintenance mode 2 setup items : Refer to the following table.
C A U T I O N
The following explanations regarding operating Panel service
functions are for service and support purposes only; do not share
this information with the user.
C H E C K
P O I N T
It is recommended that the Paper Release Lever be released before
starting the Maintenance Mode 2. Doing this will prevent the
printer from entering initialization actions and allow operations to
be performed smoothly.
Table 1-48. Maintenance Mode 2 Setup Items (Top menu)
Item Panel display
Counter indication menu VIEW COUNTERS MENU
Counter initialize menu CLEAR COUNTERS MENU
Adjustment / setup menu SERVICE CONFIG MENU
Maintenance information menu MAINTE INFO MENU
Table 1-49. Counter indication menu
Item Panel display Setup value
Cutter life counter value CUTTER LIFE
0~4294967295 (Decimal)
Cutter life total counter value CUTTER TOTAL
0~4294967295 (Decimal)
Total prints counter value TTL PAGES
0~4294967295 (Decimal)
Waste ink counter A value WAST.INK A
0~4294967295 (Decimal)
Waste ink counter B value WAST.INK B
0~4294967295 (Decimal)
CR motor life counter value CR MOTOR 0~4294967295 (Decimal)
CR motor life total counter value CR TOTAL
0~4294967295 (Decimal)
PF motor life counter value PF MOTOR
0~4294967295 (Decimal)
Head unit (K) life counter value HEAD K
0~4294967295 (Decimal)
Head unit (C) life counter value HEAD C
0~4294967295 (Decimal)
Head unit (M) life counter value HEAD M
0~4294967295 (Decimal)
Head unit (LC) life counter value HEAD LC
0~4294967295 (Decimal)
Head unit (LM) life counter value HEAD LM
0~4294967295 (Decimal)
Head unit (Y) life counter value HEAD Y
0~4294967295 (Decimal)
Cleaning unit life counter value CLEANER
0~4294967295 (Decimal)
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com