Epson Stylus Pro 10000 - Board ASSY CSIC Removal

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 136
4.3.2.4 Board ASSY CSIC Removal
1. Remove the R Side Cover as described in 4.3.1.4 "R Side Cover Removal".
2. Remove the cables from the following connectors. (Eleven cables)
Figure 4-50.
3. Remove four screws securing the board, then remove the CSIC board.
Figure 4-51.
Table 4-4. CSIC Board Connectors
Connector # Pins Color Connection Notes
CN1 2 W / K I/C Holder Cover Sensor
CN2 FFC C362DRV CN29
CN3 FFC
Ink Cartridge type (color) Sensor
: Black
CN4 FFC
Ink Cartridge type (color) Sensor
: Cyan
CN5 FFC
Ink Cartridge type (color) Sensor
: Magenta
CN6 FFC
Ink Cartridge type (color) Sensor
: Light Cyan
CN7 FFC
Ink Cartridge type (color) Sensor
: Light Magenta
CN8 FFC
Ink Cartridge type (color) Sensor
: Yellow
CN9 3
GRAY x 2
W
Ink Pump ASSY
Vacuum sensor
R
CN10 3
GRAY x 2
W
Creaning Unit
Location detect sensor
Blk
CN11 3
GRAY x 2
W
Ink Pump ASSY
Carriage Lock Sensor
W
T_457
CN1
CN9
CN10
CN11
CN3 CN4 CN5 CN6 CN7 CN8
CSIC Board
Flat cable
Ink Cartridge Holder / Slots
Screws
Screws
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com