Epson Stylus Pro 10000 - Product Description

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 316
8.1 Product Description
8.1.1 Product Description
This section explains the feature on the specification of EPSON Stylus Pro 10000/
10000CF.
Basic Specifications

Ink
 Pigment ink / Dye ink
Users can select pigment ink or dye ink.
 Color
Black, Photo Black, Matte Black, Cyan, Magenta, Yellow, Light cyan, Light
magenta
 Printing speed of graphic mode
 High-speed Throughput
The HJFK board is equipped as standard.
 Dimensions of Unit (mm)
1865 (W) x 1222 (H) x 680 (D)
 Weight
131Kg (including the standard stand)
Feature of the software

Change the Drive board
 Complies with Multi-Protocol Ethernet I/F Card Firmware version 2.14 or later.
Change parts
The following 10600 parts are different from Stylus Pro 10000/10000CF parts, so
consider this during servicing.
Table 8-1. Select Pigment Ink or Dye Ink
Ink Model Name
Pigment ink (HCD/PPI)
Stylus Pro 10600UC
Pigment ink (HC2)
Stylus Pro 10600CF
Dye ink (AY)
Stylus Pro 10600DYE
Table 8-2. Printing Speed
Horizontal resolution
Printing Speed
HC2/AY HCD/PPI
360dpi 24 IPS/FOL 24 IPS/FOL
720dpi 30 IPS/FOL 24 IPS/FOL
1440dpi 30 IPS/4pass 24 IPS/4pass
Table 8-3. Change parts
Change Location Parts Name
Parts Code
10600 10000
Head rank ID addition
PRINT HEAD SET F086030 F086010
Ink supply needle material
change
HOLDER ASSY, IC 1213139 1058958
Weight placed on bottom of
CR unit
HEAD WEIGHT SET 1231320 -
JOINT, BK material change
JOINT, BK 1213137 1033481
"Pump Cap" porous felt float
protector wire added
PUMP CAP UNIT ASSY. 1212548 1059030
Cutter shape changed (blade
length extended)
PAPER CUTTER BLADE PM10SPB PM90SPB
Leg shape change
(Leg length shortened)
STAND ASSY. 1231323 (1063869)
Draining cartridge newly
established (Same package as
main unit) *1
DRAINING CARTRIDGE 1214261 -
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com