Epson Stylus Pro 10000 - Page 331

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 324

Firmware version
Firmware version is displayed as following,
<Display sample> "Ver.TP0xxxx.yyyy.zzzz"
<xxxx>: interface controller version (4 letters)
<yyyy>: engine controller version (4 letters)
<zzzz>: ESC/P3 controller version (4 letters)
NOTE: <zzzz> is blank when ESC/P controller is not connected.
 Print quantity capacity by cartridge
Displays the number of pages able to be printed (estimated) for each cartridge
according to the cartridges currently installed.
 Total ink used
Total ink used with following operations is displayed in gram.
 Print operation (regardless of print completed or canceled)
 All flushing operation
 Auto nozzle check operation
 All cleaning operation
 Total paper used
Total paper used (paper fed) with print operation is displayed in centimeter.
Manual paper feeding is not counted.
 Clear total ink used
Reset "Total ink used" to 0.
 Clear total paper used
Reset "Total paper used" to 0.
 Ink used pre page
Total ink used pre page when the last print was completed is displayed.
 Job History
The following is displayed.
 Job No. saved in the printer.
 Amount of paper used in each job is displayed.
 Amount of ink used in each job is displayed.
 Clear Job History
Selecting this mode allows to clear the job history saved in the printer.
 Total prints
Total prints are displayed in decimal. (Max. 6 figures)
 Ink remaining
 Waste ink count
It counts right waste ink and left waste ink, and displays less one.
 Cutter life monitor
Displays the calculated value for total cut cycles.
NOTE: This is only a reference value because cutter life will differ according to
usage conditions.
 CR motor life monitor
Displays the calculated value for total CR return cycles.
 PF motor life monitor
Displays the calculated value for total paper feeding distance.
Table 8-10. Display ink remaining
Ink remaining Panel Display Ink end LED
100 ~ 81% remaining
E*****F Off
80 ~ 61% remaining
E**** F Off
60 ~ 41% remaining
E*** F Off
40 ~ 21% remaining
E** F Off
20 ~ just before near end
E* F Off
After near end ~ just before ink end
nn% Blink
ink end
0% On
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com