Epson Stylus Pro 10000 - Page 41

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Operating Panel Messages 34
Notes*:Only when PG setting = WIDE, 20th character is "H" on LCD.
INK LOW
When total dots fired = 90%, cartridge enters near-end
condition. Remaining ink = A1 at 100% duty
MAINTENANCE REQ. nnnn
Printer requires maintenance - see “Maintenance
Request” on page 49
PRINTING *
Processing print data.
PAPER OUT
• No paper loaded
• End of roll paper (printer stops feeding)
• End of sheet paper (when paper feeds to eject
position, put hand under the sheet and press Cut/
Eject to release)
Table 1-27. Operating Panel Messages (continued)
Display Message Meaning
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com