Epson Stylus Pro 10000 - Page 53

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Maintenance Mode 1 46
NOTE: (*1) When hexadecimal dump mode is executed, "HEX MODE" is displayed.
HEXADECIMAL DUMP
The hex dump function allows data sent to the printer to be printed and displayed in
hexadecimal format.
One line contains 16 data items in hexadecimal format, with the equivalent characters
printed at the right of each line.
If no equipment characters exist (eg control codes) a full stop is printed.
Each 16 data items is printed, and if the last line contains less than 16 data items, this
line is printed by pressing the Pause button.
SelecType is not possible in the hex dump mode.
The use of this function allows the user to check that data has been sent correctly from
the computer to the printer.
This mode is terminated by switching power OFF.
PANEL DISPLAY LANGUAGE SELECT
Selecting this mode allows the user to select English, French, Italian, German, Spanish,
Portuguese for display on the LCD.
M/W7 MODE SELECT
Followings can be selected for 360X720dpi M/W printing mode pattern.
 A:
Uni-D: Head 1/4 feeding
Bi-D: Head 1/2 feeding
 B:
Uni-d/Bi-d: Head 1/4 feeding
 C:
Uni-d/Bi-d: MW (Stylus Pro 7000/9000 same mode)
Table 1-44. Maintenance Mode 1 Setup Items
Item Panel display Setup value
Print hexadecimal dump HEX DUMP
PRINT *1
Panel display language select LANGUAGE
ENGLISH, FRENCH, ITALIAN,
GERMAN, SPANISH,
PORTUGUE
Parallel interface mode PARA. I/F
ECP
, COMPAT
Set IEEE1284.4 IEEE1284.4
ON, OFF
Set MW7 Mode MW7
A
, B, C
Set selectable MW2 Mode MW2 SELECT
1, 2, 3, 4, 5, 6
Auto nozzle check AUTO NOZZLE CHK.
ON
, OFF
Ink information (K) K CARTRIDGE INFO
(Ink information menu)
Ink information (C) C
CARTRIDGE INFO
(Ink information menu)
Ink information (M) M CARTRIDGE INFO
(Ink information menu)
Ink information (Lc) Lc
CARTRIDGE INFO
(Ink information menu)
Ink information (Lm) Lm CARTRIDGE INFO
(Ink information menu)
Ink information (Y) Y
CARTRIDGE INFO
(Ink information menu)
Gap adjustment menu 2 HEAD ALIGNMENT MENU 2
Supersonic cleaning
SSCL B/C
EXEC
SSCL LC/LM
EXEC
SSCL M/Y
EXEC
Paper feed adjustment mode table1
(Pigment, PH=less than 0.1mm)
XX1=<nn>:<mm>
<nn>:00H-C9H
<mm>:00H-C9H, FFH
Paper feed adjustment mode table2
(Pigment, PH=less than 0.2mm)
XX2=<nn>:<mm>
<nn>:00H-C9H
<mm>:00H-C9H, FFH
Paper feed adjustment mode table3
(Dye, PH=less than 0.1mm)
XX3=<nn>:<mm>
<nn>:00H-C9H
<mm>:00H-C9H, FFH
Paper feed adjustment mode table4
(Dye, PH=less than 0.2mm)
XX4=<nn>:<mm>
<nn>:00H-C9H
<mm>:00H-C9H, FFH
Paper feed adjustment mode table5
(Dye/Pigment, PH=less than 0.5mm)
XX5=<nn>:<mm>
<nn>:00H-C9H
<mm>:00H-C9H, FFH
Paper feed adjustment offset 1
(Pigment)
XXO=<nn>
<nn>:-32 - 0 - + 32
Paper feed adjustment offset 2 (Dye) XXP=<nn>
<nn>:-32 - 0 - + 32
System table version XXS=<mmmmm><n>
<mmmmm>: EG F/W version
User table version XXU=<nn>
<nn>: 01H - FFH
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com