Fagor CNC 8055 T User Manual

Operating manual
CNC 8055
CNC 8055i
UTILITIES
8.
·T· MODEL
SOFT: V02.2X
·155·
Accessing the programs using the explorer
Modify comment
To rename the comment of the selected program as long as it is a modifiable program. The
comment must not exceed 20 characters. After modified, its date/time will change.
To change the comment of a program, first select it in the right panel and after pressing the
<Modify> softkey <comment> option, it shows the text box "new comment" where the new
comment may be written.
No comment of a program may be renamed in DNC 2/E.
Modifying permissions
It may be used to modify the OEM, hidden, executable and read-only permissions of programs
that are displayed at the time in the explorer. Thus, if it is an OEM program, it will request an
OEM password and if a program is assigned the <hidden> attribute, its relevant icon immediately
appears on the list of the explorer. After modified, its date/time will change.
To change the permission of a program, first select it in the right panel and after pressing the
<Modify> softkey <permissions> option, it shows the text box "new comment" where the new
comment may be written.
No permission of a program may be renamed in DNC 2/E.
Delete
It may be used to delete a previously selected program. Only a modifiable program may be
deleted.
To delete a program, first select it in the right panel and after pressing the <Actions> softkey,
<[CLEAR]> option, it will disappear from the program listing displayed in the explorer.
Copy
It copies the selected program onto the clipboard. First select the program to be copied in the
right panel and press the <Actions> softkey <Copy [C]> option. Then, select the destination
folder and press the <Paste [V]> option located under the same <Actions> softkey.
Cut/move
It copies the selected program onto the clipboard. First select the program to be cut/move in the
right panel and press the <Actions> softkey <Cut [X]> option. Then, select the destination folder
and press the <Paste [V]> option located under the same <Actions> softkey. Once the content
of the clipboard has been pasted, the files will be deleted from the source folder and moved to
the new destination.
These operations are carried out using the horizontal softkeys shown at the bottom of the screen
and can only be carried out on the programs being displayed on the screen.

Fagor CNC 8055 T Specifications

General

Brand	Fagor
Model	CNC 8055 T
Category	Power Tool
Language	English