Operating manual.
CNC 8060
CNC 8065
4.
AUTOMATIC MODE
Program simulation and execution.
·100·
(REF: 1807)
Changing tool length due to tool change. #TOOL AX
#TLC OFF
Programming in the machine coordinate system. #MCS ON #MCS OFF
Coordinate transformation.
Instructions #ACS DEF, #ACS ACT, #CS DEF and #CS ACT
do not cancel the retrace function.
#ACS ON #ACS OFF #ACS NEW
#CS ON #CS OFF #CS NEW
#RTCP OFF
Kinematics change. #KIN ID
Independent axis. #MOVE #MOVE ABS
#MOVE ADS #MOVE INF
Electronic cam. #CAM ON #CAM OFF
#FOLLOW ON #FOLLOW OFF
Definition. Functions and instructions.
To Next Page
Loading...
