CNC 8060
CNC 8065
8
·155·
(REF: 1807)
EDISIMU MODE (EDITING AND
SIMULATION)
Program editor, Unicode format.
The editor of the CNC admits Unicode characters. When saving a program, the editor
respects its original format, ANSI or Unicode, except when editing a Unicode character, in
which case the CNC will always save the program in Unicode format.
8.1 Interface description.
On a typical screen for this work mode, the information is laid out as follows.
A Windows of the EDISIMU mode. Every screen may consist of one or more windows.
B Status of the program selected in this work mode or channel number when using them.
In any case, the background color will be different depending on the status of the program
being simulated.
Ready Background color: White.
In simulation Background color: Green.
Interrupted Background color: Dark green.
In error Background color: Red.
C Program name and location.
D CNC messages.
Programs in Unicode format are not compatible with versions older than V4.0. A program in Unicode
format cannot be edited or executed in a version older than V4.0.
A third-party text editor (like Windows notepad) may be used to convert Unicode format programs into
ANSI format; but special characters that have no ANSI equivalent will be lost in the process.
To Next Page
Loading...
