Operating manual.
CNC 8060
CNC 8065
20.
PLC
Program monitoring
·360·
(REF: 1807)
20.6.1 Softkey menus. Monitoring in C language or mnemonic language.
In a program edited in C language or in mnemonic language, the softkey menu shows the
following options.
Monitoring "Size +"
Every time this softkey is pressed, the size of the text will increase.
Monitoring "Size -"
Every time this softkey is pressed, the size of the text will decrease.
Monitoring "Bold"
When selecting this option, the text of the program appears in bold.
Monitoring "Find"
This softkey is used to find text in the program. When selecting this option, the CNC shows
a dialog box requesting the text to be found. Key in the text and press [ENTER] to begin the
search.
As the text is being searched, the cursor will position on the match found. To end the search,
press [ESC].
Monitoring "Customize"
It is used to personalize certain functions of the monitoring window. When selecting this
option, the CNC shows a dialog box with the options available for customizing.
This softkey toggles the display between the mnemonic language and the contact language
(ladder diagram). The softkeys of the horizontal menu change according to the selected
language.
To Next Page
Loading...
