Fagor CNC 8065 - Softkey Menus. Options of the Statistics Service

Operating manual.
CNC 8060
CNC 8065
20.
PLC
"Statistics" service
·378·
(REF: 1807)
20.12.1 Softkey menus. Options of the "Statistics" service.
Softkey. Description.
This softkey refreshes the table information.
This softkey may be used to print the table in the pre-determined printer or save it
as a file (prn format) at the CNC. When selecting the "File" option, it will be saved
in the folder "C:\Cnc8070\Users\Reports\".
When selecting this option, the CNC will show a dialog box requesting the print
destination (printer or file). After selecting the destination, press [ENTER] to print it
or [ESC] to cancel it.