Fagor CNC 8065 - Default Chapter; About the Product - CNC 8060

Operating manual.
CNC 8060
CNC 8065
·11·
(REF: 1807)
ABOUT THE PRODUCT - CNC 8060
BASIC CHARACTERISTICS.
(*) Differential TTL / Sinusoidal 1 Vpp (**) TTL / Differential TTL / Sinusoidal 1 Vpp / SSI protocol / FeeDat / EnDat
Basic characteristics. 8060
M FL
8060
M Power
8060
T FL
8060
T Power
8060
L
Number of axes. 3 to 4 3 to 6 3 to 4 3 to 6 3 to 6
Number of spindles. 1 1 to 2 1 to 2 1 to 3 1
Maximum number of axes and spindles. 57577
Interpolated axes. 44444
Number of tool magazines. 1 1 1 1 to 2 1
Number of execution channels. 1 1 1 1 to 2 1
Number of handwheels. 1 to 3
Type of servo system. Analog / Sercos Digital
Communications. RS485 / RS422 / RS232
Ethernet
Integrated PLC.
PLC execution time.
Digital inputs / Digital outputs.
Marks / Registers.
Timers / Counters.
Symbols.
< 1ms/K
1024 / 1024
8192 / 1024
512 / 256
Unlimited
Block processing time. < 2.0 ms < 1.5 ms < 2.0 ms < 1.5 ms < 1 ms
Remote modules. RIOW RIO5 RIO70 RIOR RCS-S
Valid for CNC. 8070
8065
8060
8070
8065
8060
8070
8065
- - -
D
I
S
C
O
N
T
I
N
U
E
D
8070
8065
8060
8070
8065
8060
Communication with the remote modules. CANopen CANopen CANfagor CANopen Sercos
Digital inputs per module. 8 24 / 48 16 48 - - -
Digital outputs per module. 8 16 / 32 16 32 - - -
Analog inputs per module. 4 4 8 - - - - - -
Analog outputs per module. 4 4 4 - - - 4
Inputs for PT100 temperature sensors. 2 2 - - - - - - - - -
Feedback inputs. - - - - - - 4 (*) - - - 4 (**)