Operating manual.
CNC 8060
CNC 8065
GRAPHIC ENVIRONMENT (MILL MODEL)
12.
Dimensions
·227·
(REF: 1807)
12.4 Dimensions
This softkey is used to define the size of the graphic representation by setting the maximum
and minimum coordinates of the graphics on each axis.
Dimensions "Automatic"
The CNC sets the dimensions that it considers best according to the movements
programmed.
Dimensions "Edit"
The CNC lets manually edit the dimension values. It is edited in the graphic window that
shows the dimensions of the graphics on each axis.
12.5 Point of view
This softkey is used to select the point of view on 3D graphics. This option is only available
for the types of graphics "Combined", "3D lines", "Sections" and "Solid 3D".
The orientation of the graphics may be directly selected at the graphic window by orienting
the XY plane and the Z axis. The XY plane may be rotated 360º and the Z axis 90º. The figure
at the lower right-hand side of the screen shows the point of view currently selected.
Point of view "Edit"
It is used to manually edit the orientation of the axes of the graphics. It is edited in the dialog
area of the graphic window that shows the current orientation of the axes.
When selecting this option, the softkey menu shows the options available for setting the
dimensions. To return to the main menu, press the [BACK] key.
Key. Meaning.
To orient the XY plane.
To orient the Z axis.
To validate and display the selected point of view.
To cancel the selected point point of view.
When selecting this option, the softkey menu shows the options available for selecting the
point of view. To return to the main menu, press the [BACK] key.
To Next Page
Loading...
