Fagor CNC 8065 - Define a New Profile, Enlarge an Existing One or Import One from a File

Operating manual.
CNC 8060
CNC 8065
11.
PROFILE EDITOR
Define a new profile, enlarge an existing one or import one from a file.
·208·
(REF: 1807)
11.2 Define a new profile, enlarge an existing one or import one from a
file.
With the softkey menu of this screen, it is possible to define any profile, a circular or a
rectangular one. It can also be used to enlarge a profile already defined or import a profile
saved in DXF format.
Softkey. Meaning.
Profile Softkey for editing any profile by defining the straight and curved sections
that make it up.
See "11.2.1 Define any profile using straight and curved sections." on
page 209.
Circle Softkey for quickly defining a circular profile.
See "11.2.2 Define a circular profile." on page 211.
Rectangle Softkey for quickly defining a rectangular profile.
See "11.2.3 Define a rectangular profile." on page 212.
Expand a profile Softkey for adding straight and curved sections to the profile.
See "11.2.4 Enlarge a profile." on page 212.
Import profile Softkey for importing a profile in DXF format.
See "11.2.5 Import a profile from a DXF file." on page 213.