Operating manual.
CNC 8060
CNC 8065
8.
EDISIMU MODE (EDITING AND SIMULATION)
Working in the program window.
·190·
(REF: 1807)
8.8.2 Simulate program blocks separately.
From the EDISIMU mode, it is possible to simulate blocks of a program separately; i.e. it is
possible to select a block of the program and simulate only that block. Blocks executed like
this change the history of the M and G functions.
Press the "EXBLK" softkey of the horizontal menu to enable this function. Being this option
active, every time the START icon key is pressed, it only simulates the block selected in the
active program. Once that block is simulated, another block may be simulated by selecting
it with the cursor and pressing [START] again and so on. The blocks may be selected with
the [
] [] keys.
To Next Page
Loading...
