Fagor CNC 8065 - Modify a Profile and Insert Corners

Operating manual.
CNC 8060
CNC 8065
PROFILE EDITOR
11.
Modify a profile and insert corners
·215·
(REF: 1807)
11.3 Modify a profile and insert corners
This softkey menu may be used to change the defined profiles either changing or deleting
existing elements, inserting new ones or introducing rounding, chamfering and tangential
entries or exits. When selecting this option, the softkey menu will show the necessary options
to modify the profile.
Modify element
This softkey may be used to modify any data of a section of the profile. Once the desired
element has been selected, one may modify the type of section (straight or arc) or its data.
Once the element has been modified, press "Validate" to confirm the changes.
The CNC recalculates the new profile according to the data used to define that section and
the next one (tangency, angle, etc.)
Insert element
This softkey may be used to insert a new element in any position of the profile. After selecting
the section after which the element is to be inserted, select the type of section (straight or
arc) to be inserted, define its parameters and press the "Validate" softkey.
The CNC recalculates the new profile according to the data used to define that section and
the next one (tangency, angle, etc.)
Delete element
This softkey may be used to delete an element of the selected profile. Once the element to
be deleted has been selected, confirm the command by pressing [ENTER]. The CNC
recalculates the new profile.
Corner definition
This softkey may be used to include rounding, chamfers, tangential entries or exits in the
defined profile. When selecting this option, the softkey menu shows the type of corners that
can be inserted.
Softkey. Meaning.
Modify element This softkey may be used to modify any data of a section of the
profile.
Insert element This softkey may be used to insert a new element in any position of
the profile.
Delete element This softkey may be used to delete an element of the selected profile.
Corners This softkey may be used to include rounding, chamfers, tangential
entries or exits in the defined profile.
Additional ISO This softkey may be used to add an ISO coded line to a previously
closed profile. Once the ISO coded line to be added has been
entered, confirm the command by pressing the [ENTER] key.
Undo To "undo" the last operation made.
Save and continue To save the profile and continue editing. Using this key does not
require that the profile be completed.
Softkey. Meaning.
Rounding Define a rounding at the profiles corners where it is possible.
Chamfer Define a chamfer at the corners of the profile where it is possible.
Tangential entry Add a tangential tool entry at the beginning of the profile.
Tangential exit Add a tangential tool exit at the end of the profile.