Operating manual.
CNC 8060
CNC 8065
21.
MACHINE PARAMETERS
Operations with tables
·396·
(REF: 1807)
21.3.3 Find text.
This softkey is used to find text or a value in the table. After pressing this softkey, the CNC
shows a dialog box requesting the text or value to be found. It is also possible to select
whether the search must start at the beginning of the table or at the current cursor position.
Key. Meaning.
Move the cursor.
It selects an option from a group.
Start the search.
Cancel the search and close the dialog box.
After defining the search options, press [ENTER] to do the search or [ESC] to cancel it.
Pressing [ENTER] positions the cursor in the first field that matches the search parameters.
Pressing this FIND icon again will allow repeating the search or defining a new one.
To Next Page
Loading...
