Operating manual.
CNC 8060
CNC 8065
·23·
(REF: 1807)
VERSION HISTORY - CNC 8060
Here is a list of the features added to each manual reference.
Ref. 1402
Ref. 1505
Ref. 1512
Ref. 1603
Ref. 1709
Ref. 1807
Software V01.00
First version.
Software V01.30
EDISIMU mode. New interface for importing DXF files.
EDISIMU mode. Graphic assistance for the program editor.
Utilities mode. Show the properties of an entity or folder.
Utilities mode. The [ENTER] key opens the file selected on the list.
User tables. The arithmetic parameter tables can show the parameters of several channels simultaneously.
Application. Send emails.
Software V01.40
New work mode. Calibrate the rotary axes of the kinematics.
F3D graphics. Improved definition of graphic parameters.
Software V01.45
EDISIMU mode. New geometric assistance; level change, origin movement and pre-selection of dimensions.
EDISIMU mode. Geometric assistance is available in the lathe model, in both ISO and editor mode.
EDISIMU mode. Geometric assistance is available in the conversational model (mill and lathe).
F3D graphics. Improved definition of graphic parameters.
Software V01.60.00
Operating Terms.
Move the interface while dragging it with the mouse.
The OEM can configure the number of horizontal softkeys (between 7 and 12).
The OEM can configure the number of vertical softkeys (between 5 and 12).
Improved resolution of the help drawings displayed on various CNC screens; for example, machining cycles, geometric aids, etc.
Edisimu mode. The selected simulation options are maintained after the CNC has been restarted.
F3D graphics. The default configuration shows the axes and tool paths.
F3D graphics. In conversational mode, the CNC recalls the type of previously selected window, either "simple" (only displaying the
diagram) or "complete" (showing the coordinates, feedrates, etc.).
F3D graphics. The selected window configuration is maintained after the CNC has been restarted.
F3D graphics. Selecting the simulation speed to a minimum will pause the simulation.
F3D graphics. The selected simulation speed is maintained after the CNC has been restarted.
Kinematics calibration. The kinematics calibration cycle has two associated subroutines (KinCal_Begin.nc and KinCal_End.nc), which
the CNC executes before and after the cycle.
Software V01.70.00
From now on, the F3D graphics are called HD graphics.
FCC Function (Fagor Feed Control). The FFC function makes it possible to replace the feedrate and speed programmed in the cycle
with the active values of the execution, which are acted upon by the feed override and speed override.
DMC Function (Dynamic Machining Control) DMC adapts the feedrate during machining to maintain the cutting power as close as
possible to ideal machining conditions.
FMC Function (Fagor Machining Calculator) A database of materials to be machined and of machining operations (milling and turning)
and an interface to choose suitable cutting conditions.
FCAS (Fagor Collision Avoidance System). The FCAS (Fagor Collision Avoidance System) option monitors automatically, in MDI/MDA,
manually and tool inspection movements in real time, so as to avoid collisions between the tool and the machine.
Tool table. New Zn data. Number of teeth.
To Next Page
Loading...
