Operating manual.
CNC 8060
CNC 8065
·24·
(REF: 1807)
Automatic mode. From this and later versions, after interrupting the execution of the program and canceling it using the "Cancel-
Continue" softkey, the CNC allows the machine to be moved using the jog keys.
Error 3753. Absolute encoder. Monitor the coordinate difference during startup (parameter MAXDIFREF).
Kinematics calibration. Allows for the calibration of all types of kinematics (parameter TYPE).
Kinematics calibration. New icon to verify the probe adjustment.
Kinematics calibration. GMOVE macro in the subrouting KinCal_Begin.nc.
Kinematics calibration. The axes may be Hirth axes.
Kinematics calibration. The cycle allows to start the calibration of the first axis in any position along the second axis
Kinematics calibration. In user mode, the data calculated by the recalibration of the kinematics are saved in the "Offsets" field of the
machine parameter table; the "Value" field defined by the OEM cannot be modified.
Kinematics calibration. The cycle creates the KinCalReport.mp file with the results of the calibration
Software V01.70.00
To Next Page
Loading...
