Operating manual.
CNC 8060
CNC 8065
11.
PROFILE EDITOR
Examples of how to define profiles.
·220·
(REF: 1807)
Rounding definition "A" and "B".
Select the "Corners" option. Press [ESC] to quit the "Corners" option.
End of editing
Select the "END" option and save the profile. The CNC quits the profile editor and inserts
the profile in the part-program.
Corners.
Rounding Select point "A" Assign radius = 5
Rounding Select point "B" Assign radius = 5
To Next Page
Loading...
