Operating manual.
CNC 8060
CNC 8065
17.
USER TABLES
Arithmetic parameter tables
·288·
(REF: 1807)
17.4 Arithmetic parameter tables
There are the following arithmetic parameter tables:
• Common parameters. The table is common to all the channels.
• Global parameters. There is a table for each channel.
• Local parameters. There are seven tables for each channel, one table per nesting level
(7 levels).
Local parameters.
The CNC generates a new nesting level for local parameters every time parameters are
assigned to a subroutine. The end of this chapter describes how to edit these tables.
Common parameters.
The comment field offers the possibility to associate a short description with the parameter.
This field is for information only; it is not used by the CNC. The comments are saved in the
file UCPComments.txt and it is possible to have one file per language. These files are saved
in the folder "../MTB /data /Lang".
A Parameters of channel 1.
B Parameters of channel 2.
A Parameter list.
B Parameter value.
C Parameter describing comment (only in the common-parameters table).
To Next Page
Loading...
