Operating manual.
CNC 8060
CNC 8065
19.
UTILITIES MODE
Protection passwords
·336·
(REF: 1807)
Machine parameters for kinetics
It is requested when trying to carry out the following actions in the machine parameter tables
for the kinematics: If not set, it will apply the password used in the rest of the machine
parameters.
• Modifying the value of a parameter.
• Initialize a table.
• Loading a table.
Administrator mode
It is requested to start the unit up in administrator mode. The access to the administrator
mode is enabled with the validation code. If you don't have this software option, you will not
be able to access the administrator mode.
To Next Page
Loading...
