61
(5) Turn F3 to change OVER WR (Overwrite) to ON to set overwrite protection.
DIRECT :PATTERN :OVER WR:DELETE : 1/1
RECALL : =020 : =ON : =OFF :
NOTE
Before setting overwrite protection, set the DIRECT item to OFF. Otherwise, the
selected pattern will be applied the panel when pressing the number button.
To Clear a Direct Pattern Registration Individually
(1) Press the WIPE button above the SELECT/KEYPAD block. The [DIRECT PATTERN]
menu is displayed and the keypad changes to DIRECT PATTERN mode.
(2) Turn F1 to change DIRECT to OFF, if it is ON.
(3) Turn F1 to select a page of the Direct Pattern memory in the menu.
DIRECT : PAGE :DIRECT :CLEAR : : 1/1
PATTERN : =0 : =OFF : >OFF : :
(4) Press the number button to be cleared. The [DIRECT RECALL] menu will then be
displayed.
(5) Turn F4 to change DELETE to ON. Press F4 to delete the registration.
DIRECT :PATTERN :OVER WR:DELETE : 1/1
RECALL : =020 : =OFF : =ON :
NOTE
Before clearing a direct pattern registration, set the DIRECT item to OFF. Otherwise,
the selected pattern will be applied the panel when pressing the number button.
To Clear All Direct Pattern Registrations
(1) Press the WIPE button above the SELECT/KEYPAD block. The [DIRECT PATTERN]
menu is displayed and the keypad changes to DIRECT PATTERN mode.
(2) Turn F3 to change CLEAR to ALL. Then press F3 to clear all direct patterns.
DIRECT : PAGE :DIRECT :CLEAR : : 1/1
PATTERN : =0 : =OFF : >ALL : :
To Next Page
Loading...
