122 Upgrade and Maintenance Manual RX2530 M4
6.2.3.3 Removing the defective hot-plug PSU
Ê Remove the PSU, see section "Removing a hot-plug PSU" on page 119.
6.2.3.4 Installing the new hot-plug PSU
Ê Install the PSU, see section "Installing a hot-plug PSU" on page 114.
6.2.3.5 Concluding steps
Ê Connect the power cord to the new PSU and secure it with a cable tie, see
section "Connecting the power cord" on page 63.
Ê Only when replacing a PSU in a non-redundant configuration: "Switching on
the server" on page 66
Ê "Performing a fan test" on page 106
To Next Page
Loading...
