258 Upgrade and Maintenance Manual RX2530 M4
Expansion cards and backup units
9.6.2 Installing an FBU in a 3.5-inch HDD chassis
I The riser holder of riser module 3 has to be exchanged with a riser holder
with shoulder screw caps (included in FBU kit).
9.6.2.1 Preliminary steps
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê Remove the riser module 3, see section "Handling riser modules" on
page 67.
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Tools: – Phillips PH1 / (+) No. 1 screw driver (for installing TFM
EP400i/EP420i)
– Phillips PH2 / (+) No. 2 screw driver (for removing/installing riser
card)
To Next Page
Loading...
