Fujitsu PRIMERGY RX2530 M4

RX2530 M4 Upgrade and Maintenance Manual 285
Main memory
10.3.3 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98
10.4 Replacing a memory module
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê "Locating the defective component" on page 48
10.4.2 Removing the defective memory module
Ê Remove the memory module, see section "Removing a memory module" on
page 284.
10.4.3 Installing the new memory module
Ê Install the memory module, see section "Installing a memory module" on
page 282.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less