242 Upgrade and Maintenance Manual RX2530 M4
Expansion cards and backup units
Figure 157: Removing the M.2 SSD (B)
Ê Pull the M.2 SSD out of its slot.
Ê Install the new M.2 SSD, see section "Installing M.2 SSDs on PDUAL
AP200" on page 236.
Ê Install the PDUAL AP200, see section "Installing the expansion card" on
page 222.
9.5.5.3 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê If using the M.2 SSD in a RAID1 configuration, a rebuild is started
automatically, see "Performing a RAID array rebuild" on page 99.
To Next Page
Loading...
Need help?
General