RX2530 M4 Upgrade and Maintenance Manual 305
12 Liquid cooling (LC)
I This chapter is valid for EMEIA region only.
I A LC configuration is provided on special release request only.
Safety notes
V CAUTION!
● Do not install unsupported CPUs. For more information on supported
CPUs, see section "Basic information" on page 306.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● When removing or installing CPUs, be careful not to touch or bend
the spring contacts on the CPU sockets.
● Never touch the underside of the CPUs. Even minor soiling such as
grease from the skin can impair the CPU’s operation or destroy the
CPUs.
● For more information, see chapter "Important information" on
page 35.
To Next Page
Loading...
Need help?
General