304 Upgrade and Maintenance Manual RX2530 M4
I When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There is
no technical problem.
Proceed as follows:
Ê Restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
If a password is assigned, enter the password and press [Enter].
Ê Select the Save & Exit menu.
Ê Select Save Changes and Exit or Save Changes and Reset.
Ê Verify that the Global Error indicator stops flashing.
Ê "Resetting the error status after replacing memory modules or CPUs" on
page 90
Ê "Enabling replaced components in the BIOS" on page 93
Ê "Resuming BitLocker functionality" on page 98
To Next Page
Loading...
