RX2530 M4 Upgrade and Maintenance Manual 47
4 Basic hardware procedures
4.1 Using diagnostic information
Use the Fujitsu ServerView Suite management software to plan the upgrade or
replacement of hardware components:
Ê In the ServerView Operations Manager Single System View select
Maintenance from the Information/Operation menu.
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, see the "ServerView Suite Local Service Concept (LSC)" manual.
I In Japan remote diagnostics procedures are not used.
Please contact your local Fujitsu customer service partner for details on the
service concept and on how to order expansion kits or spare parts.
Use the Fujitsu Illustrated Spares Catalog to identify the required spare part and
obtain technical data and order information. Illustrated Spares catalogs are
available online at http://manuals.ts.fujitsu.com/illustrated_spares.
I In Japan the Fujitsu Illustrated Spares Catalog is not used.
4.1.1 Locating the defective server
For easy identification of the server, switch on the ID indicator, especially when
working in a datacenter environment or a server room.
Ê Press the ID button on the front panel, use the iRMC web interface or the
ServerView Operations Manager user interface to switch on the system
identification LEDs.
I For more information, see the "ServerView Suite Local Service
Concept (LSC)" manual and the iRMC user guides.
Ê When using ServerView Operations Manager to toggle the ID indicator,
choose Single System View and press the Locate button.
Ê Remember to switch off the ID indicator after the maintenance task has been
concluded successfully.
To Next Page
Loading...
