RX2530 M4 Upgrade and Maintenance Manual 191
Hard disk drive (HDD) / solid state drive (SSD)
Ê If an ODD has been removed, install the ODD again, see section "Installing
the ODD" on page 336.
7.4.14.4 Installing additional HDD/SSD modules
Ê Remove the dummy locks, see section "Removing a 2.5-inch HDD/SSD
dummy module" on page 156.
Ê Insert additional HDD/SSD modules, see section "Installing 2.5-inch
HDD/SSD modules" on page 156.
7.4.14.5 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê Update the system information of your server using the Chassis ID Prom
Tool, see section "Using the Chassis ID Prom Tool" on page 103. Select the
corresponding system name.
Ê "Performing a RAID array rebuild" on page 99