370 Upgrade and Maintenance Manual RX2530 M4
System board and components
16.3.1 Installing the TPM
16.3.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê If applicable, remove the riser module 2, see section "Removing a riser
module" on page 68.
16.3.1.2 Installing the TPM
Figure 278: Position on the system board
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Software: 5 minutes
Tools: – Bit screw driver
– TPM bit insert
(
*
)
(
*
)
For Japan:
– TPM module fixing tool (S26361-F3552-L909)
To Next Page
Loading...
