RX2530 M4 Upgrade and Maintenance Manual 379
System board and components
16.4 iRMC microSD card
I The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the “ServerView embedded Lifecycle
Management (eLCM)” user guide.
16.4.1 Installing the iRMC microSD card
16.4.1.1 Preliminary steps
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê If applicable, remove the riser module 3, see section "Removing a riser
module" on page 68.
16.4.1.2 Installing the iRMC microSD card
Figure 284: iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
