392 Upgrade and Maintenance Manual RX2530 M4
System board and components
Figure 296: Connecting the cable to the system board
Ê Connect the cable to the connector "ROC" on the system board.
For the cable plan, see chapter "Appendix B" on page 437.
16.6.1.3 Concluding steps
Ê "Installing the air duct" on page 74
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
To Next Page
Loading...
