Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A104
Flight inStrumentS
SyStem
oVerVieW
Flight
inStrumentS
eiS
Audio pAnel
& cnS
Flight
mAnAgement
hAzArd
AVoidAnce
AFcS
AdditionAl
FeAtureS
AppendiceSindeX
The MDA/DA function is reset (set to “Off”) when the power is cycled or another approach is activated.
Setting the Baro/Temp Comp Minimum Descent Altitude/Decision Height and bug:
1) From the Home Screen, touch Utilities > Minimums > Minimums.
2) Touch Baro or Temp Comp (OFF is selected by default.)
• If Temp Comp is selected, touch Temp at Dest. Use the keypad to enter desired temperature, and touch
Enter.
3) Use the keypad to enter the desired altitude from zero to 16,000 feet, and touch Enter.
Figure 2-53 Minimum Descent Altitude/Decision Height
Alerting is inhibited while the aircraft is on the ground and until the aircraft reaches 150 feet above the MDA/
DH. If the aircraft proceeds to climb after having reached the MDA/DH, once it reaches 50 feet above the MDA/
DH, alerting is disabled.
This manual downloaded from http://www.manualowl.com